MDE276 - Four-Axis Micropositioner

MDE276 - Four-Axis Micropositioner

Four-Axis Micropositioner   


Tilt Features:  
  • Clamps fitted to angular motions
  • Tilt range on each axis 3°, sensitivity 5 arc seconds
  • Kinematic gimbal design gives independent adjustment on two tilt axes
Centring Features:
  • Travel ± 1 mm
  • Stainless steel body
  • Two independent dovetail slides
  • Very smooth backlash-free motion
  • No interaction between X and Y axes
  • Fine thread 0.25 pitch adjusters
  • Standard 11 mm Ø bore suits small laser diodes

A four-axis translation stage comprising an MDE270 Precision Tilt Stage with an MDE251 Precision XY Centring Micropositioner.

MDE270 Specifications MDE276 4-Axis Micropositioner Axis Diagram
Tilt range on each axis  
Sensitivity 5 arc seconds
Adjustment Hex key
Mounting options M2 clearance holes
M2.5 tapped holes
M4 post-mounting
(use adapter MDE274)
Clamps fitted to angular motions

MDE251 Specifications
Two independent dovetail slides combined
Travel in X & Y ± 1 mm
Sensitivity < 0.5 µm
Bore diameter 11 mm
Adjusters 0.25 pitch x2

Variants, Options, and Accessories


Note: Surface mating with these micropositioners must be truly flat. Unflat surfaces or overtightened screws will cause the slide motion to be jerky and stiff due to distortion. Dovetail slides, unlike miniature ball slides, are unlikely to be permanently damaged by temporary distortion, as the load is supported on a comparatively large area.

Product Code: Martock MDE276

Availability:  In Stock 
Price: £658.00
Qty:     - OR -   Add to Wish List