EFP912 - Interchangeable Front Plate Optic Holder - 2 inch/50 mm

EFP912 - Interchangeable Front Plate Optic Holder - 2 inch/50 mm

Interchangeable 2" (50 mm) Front Plate Optic Holder   

EFP912   

  • Nylon tipped clamping screw
  • Excellent long term stability
  • Engraved cross-hairs aid alignment
  • User configurable left-hand or right-hand geometry
  • Rear optic loading for repeatable location of mirror face
  • Range of front plates for 1"/25 mm, 2"/50 mm, 3"/75 mm or 4"/100 mm optics
  • Interchangeable front plate optic holders for E910 Series High Precision Mirror Mounts

The EFP91n Series front plate optic holders are for use with the E910 Series mirror mount frames. The user can fit different sizes of front plate to hold optics ranging from 1 inch/25 mm through to 4 inch/100 mm. The interchangeable front plates greatly boost the versatility of these mounts as the same frame can accommodate a variety of mirror sizes. Furthermore, on-line optics can be quickly replaced with alternative mirrors that have previously been preloaded off-line into additional front plates.

These mounts use the highest quality hand-lapped adjusters to provide smooth and accurate adjustment for critical laser and optical alignment. The 0.25 pitch (approx 100 TPI) threaded screws provide a very high degree of sensitivity and control, and complement the excellent long term stability of the base. Ease of use is enhanced by the provision of both a hex drive socket and a removable knurled knob.

Optics are loaded via the rear of the front plate, and the front face of the mirror locates against a mechanical datum. Thus the critical optical surface always locates in the same place irrespective of the thickness of the mirror substrate. A nylon tipped screw positively locks the mirror optic against two machined pads within the front plate.

The E910 Series High Precision Mirror Mounts use the highest quality hand-lapped adjusters to provide smooth and accurate adjustment for critical laser and optical alignment. The 0.25 pitch (approx 100 TPI) threaded screws provide a very high degree of sensitivity and control, and complement the excellent long term stability of the base. Ease of use is enhanced by the provision of both a hex drive socket and a removable knurled knob.

Specifications

Mirror size 2" (50 mm)
Angular range ± 4.5º
Angular resolution  2.5 arc seconds
Configuration   Right- or Left-hand user changeable


Mirror mounts can be configured left or right handed by the user.
 

Interchangeable mounts accept optics from 1 to 4 inches (25 to 100 mm) in diameter
 

Engraved cross-hairs aid alignment


Variants, Options, and Accessories


Further Options and Accessories

Custom configurations

Product Code: Elliot Scientific EFP912

Availability:  In Stock 
Price: £58.10
Qty:     - OR -   Add to Wish List