Heat Pumps & Temperature Controllers - Peltier Effect Thermo-electric Coolers

Heat Pumps & Temperature Controllers - Peltier Effect Thermo-electric Coolers

Peltier Effect Thermo-electric Coolers   

Heat Pumps and Temperature Controllers   

  • Laser Diodes
  • IR Detection
  • High-gain Amplifiers
  • Device Measurement
  • Process Control
  • Cold Plate Assemblies

The Electron Dynamics' HPE series of heat pumps offer a fully integrated thermo-electric temperature control system in a convenient package. The HPE comprises fan, heatsink, thermo-electric cooler and thermal block constructed as a complete heat pump assembly.
By using the Peltier effect it can both heat and cool, so an HPE unit can effect precise servo-controlled thermal stabilisation when used in conjunction with one of our ETCS temperature controllers. Alternatively, it can be used in an unregulated mode from a 15 volt DC power supply.




Max. Current

(mm x mm) 













ETCS Temperature Controllers

Designed mainly for use with the Electron Dynamics' HPE series of heat pumps, the ETCS temperature controllers enable precise control from -100 °C to +200 °C with a stability of 0.001 °C in varying ambient conditions.
The controllers are programmed using supplied PC software via a USB connection. Parameters such as output limits, PID terms, temperature alarms and operating modes can be set up. In addition, advanced features have been included to offer PID autotuning, temperature ramping and cycling.
As the configuration data is stored within the controller once programmed, the unit can be disconnected from the PC for stand-alone use. Remote operation and integration into a larger control system is possible.
We offer 3 models to complement our heat pumps - Standard (up to 5 A), Intermediate (Up to 10 A) and High Output (Up to 15 A) - as cased or bare PCB assemblies.

An Electron Dynamics Bare ETCS Temperature Controller

An Electron Dynamics Enclosed ETCS Temperature Controller

ETCS-MP10A PCB Version

ETCS-MU5A Cased Version

Supply: 5 to 28 Vdc 
• Standard: 0 to  5 A (ETCS-Mx5A)
• Intermediate  0 to 10 A (ETCS-Mx10A)
• High Output 0 to 15 A (ETCS-Mx15A)
x = P for PCB Version or U for Cased Version
Bi-directional heating and cooling
Variable output: 0 to 100% 0.1% resolution
Variable PWM rate: 20 Hz to 1 kHz
Control: From PC by USB
Programmable PID terms
Will operate as P, PI, PID or On/Off with Dead Band
Resolution 0.001 °C
Max stability 0.001 °C depending on thermodynamics /setup etc.
Functions:  Auto-tuning sets up PID terms automatically
Test cycling between two temperatures over n cycles
Test ramping at defined rate between two temperatures over n cycles
Setpoint: Potentiometer or Software
Limits: Set permissible temperature band for operation
Prevents problems due to sensor faults and thermal runaway
Alarms: PC configurable TTL output
High temp. Low temp. or out of band
Sensor: LM35 supplied as standard.
Other LM or PT thermocouples, or an NTC Thermistor, can be specified
Approvals:     CE Approved, ROHS Compliant

Electron Dynamics Ltd. website.

Product Code: Electron Dynamics Heat Pumps

Availability: Contact us for details
Call Us on +44 (0)1582 766300 or   - OR -   Add to Wish List

Sign up for our newsletter

© 2017 Elliot Scientific Ltd.