Products
Contact Us
Brand: Elliot | Martock
Model: Martock MDE745-30
Vacuum Waveguide/Device Holder - 30 mm
MDE745-30
30 mm waveguide length
18 mm nominal height
Vacuum mounting
Hold-down groove custom cut for application
The model MDE745 series is a vacuum waveguide mount for use with MDE717 and MDE718 fibre rotators. Th..
£0.00
Brand: Elliot | Martock
Model: Martock MDE746-10
Mechanical Waveguide/Device Holder - 10 mm
MDE746-10
10 mm waveguide length
18 mm nominal height
Mechanical clamp mounting
Adjustable end stop
The model MDE746 series is a waveguide/substrate mount with mechanical clamp arm and adjustable end-stop for us..
£0.00
Brand: Elliot | Martock
Model: Martock MDE746-14
Mechanical Waveguide/Device Holder - 14 mm
MDE746-14
14 mm waveguide length
18 mm nominal height
Mechanical clamp mounting
Adjustable end stop
The model MDE746 series is a waveguide/substrate mount with mechanical clamp arm and adjustable end-stop for us..
£0.00
Brand: Elliot | Martock
Model: Martock MDE746-30
Mechanical Waveguide/Device Holder - 30 mm
MDE746-30
30 mm waveguide length
18 mm nominal height
Mechanical clamp mounting
Adjustable end stop
The model MDE746 series is a waveguide/substrate mount with mechanical clamp arm and adjustable end-stop for us..
£0.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE747
Waveguide Mount with Pitch, Roll & Height Adjust
MDE747
Angular travel ± 3°
Optical axis height 15 mm ± 3 mm
Waveguide mount slides & clamps in Y direction 12 mm
Mechanical clamp arm from MDE743 may be fitted to stage
Fits on flexure stages and MDE1..
£735.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE750-RH
Bare Fibre Holder (Mechanical), Long Reach
MDE750 -RH
Very easy to use
Clamp force adjustable from 25 to 125 g
Contact point on fibre is a resilient pad
125/250 µm fibre with a jacket up to 1 mm diameter
Fibre held in user-replaceable V-groove by spring clamps
Clamp a..
£379.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE750-LH
Bare Fibre Holder (Mechanical), Long Reach
MDE750 -LH
Very easy to use
Clamp force adjustable from 25 to 125 g
Contact point on fibre is a resilient pad
125/250 µm fibre with a jacket up to 1 mm diameter
Fibre held in user-replaceable V-groove by spring clamps
Clamp a..
£379.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE751
FC/PC Connector Fibre Holder (Mechanical), Long Reach
MDE751
Very easy to use
Holds standard FC/PC Patchcords
Other connector types available
Custom grooves available
Fibre held in user-replaceable V-groove by spring clamps
Long reach fibre holder for ..
£285.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE752
Universal Base
MDE752
The Universal Base is for holding components on top of flexure stages. Locates in either of the two orthogonal slots on the flexure stage top plate for offset component mounting.
All accessories are compatible with the Elliot Gold™ series..
£115.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE753
Long Reach Microscope Objective Holder
MDE753
Facilitates offset mounting of objectives
Ideal for DWDM component inspection
The Long Reach Microscope Objective Holder fits onto an MDE752 as shown, allowing the objective to be placed in positions offset to th..
£212.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE850
Horizontal Platform Three-Axis XYZ Micropositioner Stage
MDE850
Stainless steel body
Small dovetail slides
Wide range of configurations
Adjustable horizontal platform
Very smooth backlash-free motion
A three axis micropositioner configured ..
£1,538.00
Contact Us
Brand: Elliot | Martock
Model: Martock MDE850M
Horizontal Platform Three-Axis XYZ Micropositioner Stage with Micrometer adjustment
MDE850M
Stainless steel body
Small dovetail slides
Micrometer adjusters
Wide range of configurations
Adjustable horizontal platform
Very smooth backlash-free motion
The MDE850M is..
£0.00