Platforms & Mounts
Brand: Elliot | Martock
Model: Martock MDE141
Riser Block Set
MDE141
This riser block set is used in conjunction with XYZ Flexure Stages to raise their optical axis height from 94 mm to 125 mm.
This is required when using standard stages opposite the MDE183/MDE185 Pitch and Yaw Stages, or X..
£162.00
Brand: Elliot | Martock
Model: Martock MDE147
Large Fixed Bracket with 60 mm Slot
MDE147
For X-axis use
The MDE147 is for mounting accessories along the X-axis of flexure stages. It attaches to front vertical pillar on the stage and provides a rigid mounting surface for other accessories. It has a slot of..
£54.00
Brand: Elliot | Martock
Model: Martock MDE147E
Large Fixed Bracket with 60 mm Slot and English (inch) Threaded Mounting Holes
MDE147E
For X-axis use
The MDE147E is for mounting accessories along the X-axis of flexure stages. It is the imperial version and attaches to front vertical pillar on..
£55.00
Brand: Elliot | Martock
Model: Martock MDE148
Small Fixed Bracket with 30 mm Slot
MDE148
For X-axis use
The MDE148 is for mounting accessories along the X-axis of flexure stages. It attaches to front vertical pillar on the stage and provides a rigid mounting surface for other accessories. It has a slot of..
£40.00
Brand: Elliot | Martock
Model: Martock MDE149
L-shaped Bracket with 46 mm Slot
MDE149
For Y-axis use
The MDE149 is for mounting accessories along the Y-axis of flexure stages. It attaches to front vertical pillar on the stage and provides a rigid mounting surface for other accessories. It has a slot of le..
£102.00
Brand: Elliot | Martock
Model: Martock MDE150
Objective Lens Mount. Standard RMS 0.800"-36 Thread
MDE150
Objective lens mount fitted with a removable stainless steel sleeve cut with the microscope objective thread. Allows easy adjustment and exchange of objectives or other components having the standa..
£78.00
Brand: Elliot | Martock
Model: Martock MDE151
Component Mount 25 mm Bore
MDE151
Plain mount fitted with a 25 mm bore that will hold 25 mm components such as Component Flange MDE152.
All accessories are compatible with the Elliot Gold™ series flexure stages. The optical axis height is 18 mm above the..
£55.00
Brand: Elliot | Martock
Model: Martock MDE152
Aluminium Alloy Flange Insert
MDE152
Aluminium alloy flange insert which can be machined by Elliot Scientific or customer to hold components such as fibre chucks. For use with Plain Mount MDE151 or Objective/Ball Lens Mount MDE150...
£31.00
Brand: Elliot | Martock
Model: Martock MDE153
Non-standard Component Plate for Elliot Gold™ Flexure Stages
MDE153
Component plate that clamps to Elliot Gold™ series flexure stages. Provides a basic platform for mounting of non-standard components.
All accessories are compatible with the Elliot Gold..
£44.00
Brand: Elliot | Martock
Model: Martock MDE154
XYZ Flexure Stage Clamp Set
MDE154
Clamp set for use with XYZ Flexure Stage accessories. Includes two clamps plus screws and a socket key. One clamp set is supplied with each of the flexure stages and accessory platforms.
An MDE154E clamp set for Englis..
£12.00
Brand: Elliot | Martock
Model: Martock MDE155
M6 Post Holder to Elliot Gold™ Flexure Stage Adapter
MDE155
Adapter plate that clamps to Elliot Gold™ series flexure stages. Enables M6 table post holders to fit XYZ flexure top. All accessories are compatible with the Elliot Gold™ series flexure stages...
£47.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE156
25 mm Extension Tube
MDE156
Extension tube for use with MDE150 Objective/Ball Lens mount and MDE151 Plain Mount. Equipped with a standard RMS 0.800"-36 thread, it extends reach by 25 mm allowing access to components on wide platforms.
All accessories are compatible..
£46.00