Fibre Holders
Brand: Elliot | Martock
Model: Martock MDE725A-nnn
Fibre to Fibre Alignment V-Block MDE725A-nnn Can be used with index matching gel to minimise coupling loss
Quick and easy mechanical coupling of two bare fibres without splicingThe MDE725A is designed to allow two bare fibres (US: fibers) to be coupled quic..
£0.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE730
Fibre holder for 3 mm micropositionersMDE730 V-groove for 125 µm fibre
Optical centre height 5.0 mm
Fits MDE265 Series Positioners
Other sizes available on request
Fibre retained by magnet (supplied)The model MDE730 is a simple fibre holder utilising a magnetic c..
£210.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE734
GRIN Lens Holder MDE734 Optical axis height 18 mm
Reversible V-block 4 mm long
To hold GRIN lenses of diameter 1 to 2 mm & 2 to 3 mmAll accessories are compatible with the Elliot Gold™ series flexure stages. The optical axis height is 18 mm above the ..
£425.00
Contact Us
Brand: Elliot | Martock
Model: Martock MDE735
Connectorised Fibre Holder FC/PC MDE735An accessory for Elliot|Martock Flexure Stages that allows for fibre (US: fiber) connection via an FC/PC (Ferrule Connector/Physical Contact) socket assemblyAll accessories are compatible with the Elliot Gold™ series flexure stages. The ..
£183.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE736
Connectorised Fibre Holder SMA MDE736 An accessory for Elliot|Martock Flexure Stages that allows for fibre (US: fiber) connection via an SMA (Sub Miniature A) socket assemblyAll accessories are compatible with the Elliot Gold™ series flexure stages. The optical ax..
£207.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE737
Connectorised Fibre Holder ST MDE737 An accessory for Elliot|Martock Flexure Stages that allows for fibre (US: fiber) connection via an ST (Straight Tip IEC 61754-2 standard) socket assemblyAll accessories are compatible with the Elliot Gold™ series flexure stages..
£209.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE750-LH
Bare Fibre Holder (Mechanical), Long Reach MDE750 -LHVery easy to use
Clamp force adjustable from 25 to 125 g
Contact point on fibre is a resilient pad
125/250 µm fibre with a jacket up to 1 mm diameter
Fibre held in user-replaceable V-groove by spring clamps
Clamp a..
£395.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE750-RH
Bare Fibre Holder (Mechanical), Long Reach MDE750 -RHVery easy to use
Clamp force adjustable from 25 to 125 g
Contact point on fibre is a resilient pad
125/250 µm fibre with a jacket up to 1 mm diameter
Fibre held in user-replaceable V-groove by spring clamps
Clamp a..
£395.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE751
FC/PC Connector Fibre Holder (Mechanical), Long Reach MDE751 Very easy to use
Holds standard FC/PC Patchcords
Other connector types available
Custom grooves available
Fibre held in user-replaceable V-groove by spring clampsLong reach fibre holder for ..
£297.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE752
Universal Base MDE752 The Universal Base is for holding components on top of flexure stages. Locates in either of the two orthogonal slots on the flexure stage top plate for offset component mounting.All accessories are compatible with the Elliot Gold™ series..
£119.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE753
Long Reach Microscope Objective Holder MDE753 Facilitates offset mounting of objectives
Ideal for DWDM component inspectionThe Long Reach Microscope Objective Holder fits onto an MDE752 as shown, allowing the objective to be placed in positions offset to th..
£221.00
Brand: Elliot | Martock
Model: Martock MDE860
MDE709 Fibre Holder Adapter MDE860 This adapter mounts the MDE709 fibre holder on to a conventional 25 mm pitch optical table or an M4 post...
£102.00