Your Cart

MDE267-3 mm travel XYZ micropositioner on base with M4 tap

MDE267-3 mm travel XYZ micropositioner on base with M4 tap
  • Stock: In stock - Contact us for lead times.
  • Click here to: Contact us
  • Model: Martock MDE267

3 mm travel XYZ micropositioner on base with M4 tap


  • Wide range of configurations
  • Very smooth backlash-free motion
  • Based on the Very Small dovetail slide series
  • One of the smallest micropositioners available

The Elliot Scientific MDE267 slide is an ultra-small, triple axis micropositioner with simple adjusters on an M4 tapped base for XYZ linear translation stage applications in physics experiments or optical systems.

Travel 3 mm
Sensitivity   < 0.5 µm

0.25 pitch with 1.27 mm hex socket
Ball hex driver not supplied

eg. MDE213-HEX, 735-144 or 609-590

Top plate 12 x 12 mm
Base M4 tapped base
Options and Accessories
MDE265 Series Drawing
Click here to download

Knurled knob adjuster
(Sold separately as P/No. MD-054115)

MDE213-HEX Hex Key 1.27AF for simple adjusters

MDE267 can be M4 post mounted
Fibre holders available: MDE719 and MDE730     
 Low magnetic version MDE267-LM
Vacuum compatible versions available

MDE267-ID 'inverted drive' model

MDE269 with optional MD-054115 adjusters


Note: Surface mating with these micropositioners must be truly flat. Unflat surfaces or overtightened screws will cause the slide motion to be jerky and stiff due to distortion. Dovetail slides, unlike miniature ball slides, are unlikely to be permanently damaged by temporary distortion, as the load is supported on a comparatively large area.

File Name Size Link
MDE267_167.PDF 85.54KiB Download
MDE267_167.SLDPRT 644KiB Download
MDE267_167.STEP 1.9MiB Download
MDE267_3D_167.PDF 229.37KiB Download
Terms and Conditions V6 206.45KiB Download
Showing 1 to 5 of 5 (1 Pages)