MDE276M - Four-Axis Micropositioner with Micrometers
Four-Axis Micropositioner with Micrometers
A four-axis translation stage with micrometers comprising an MDE270 Precision Tilt Stage and MDE251M Precision XY Centring Micropositioner.
|Tilt range on each axis||3°|
|Sensitivity||5 arc seconds|
|Mounting options||M2 clearance holes
M2.5 tapped holes
(use adapter MDE274)
|Clamps fitted to angular motions|
|Two independent dovetail slides combined|
|Travel in X & Y||± 1 mm|
|Bore diameter||11 mm|
|Adjusters||Micrometer reading to 0.01 mm x2|
Note: Surface mating with these micropositioners must be truly flat. Unflat surfaces or overtightened screws will cause the slide motion to be jerky and stiff due to distortion. Dovetail slides, unlike miniature ball slides, are unlikely to be permanently damaged by temporary distortion, as the load is supported on a comparatively large area.