MDE269-V-3 mm travel XYZ micropositioner - vacuum compatible

3 mm travel XYZ micropositioner - vacuum compatible

MDE269-V   

• Wide range of configurations
• Very smooth backlash-free motion
• Based on very small dovetail slides
• One of the smallest micropositioners available

The Elliot Scientific MDE269 slide is an ultra-small, triple axis micropositioner with simple adjusters for XYZ linear translation stage applications in physics experiments or optical systems.The "V" Vacuum version is manufactured from materials suited to use in vacuum applications.

**Please see advisory note on handling of Vacuum compatible stages <<Vacuum stages>>

***Vacuum stages should not be handled with bare hands, and should be mounted using vacuum compatible screws.

Options and Accessories		MDE265 Series Drawing Click here to download
Knurled knob adjuster (Sold separately as P/No. MD-054115) MDE213-HEX Hex Key 1.27AF for simple adjusters
Post mounting using MDE857 (and MDE858 if required)
Fibre holders available: MDE719 and MDE730
Low magnetic version MDE269 LM
Standard version MDE269  MDE269 KN (Knurled Adjusters)
MDE269 with optional MD-054115 adjusters

Note: Surface mating with these micropositioners must be truly flat. Unflat surfaces or overtightened screws will cause the slide motion to be jerky and stiff due to distortion. Dovetail slides, unlike miniature ball slides, are unlikely to be permanently damaged by temporary distortion, as the load is supported on a comparatively large area.