Your Cart

MDE268-KN-3 mm travel XZ micropositioner - knurled adjusters

MDE268-KN-3 mm travel XZ micropositioner - knurled adjusters
Limited Stock
MDE268-KN-3 mm travel XZ micropositioner - knurled adjusters
  • Stock: In stock - Contact us for lead times.
  • Click here to: Contact us
  • Model: Martock MDE268-KN

3 mm travel XZ micropositioner - knurled adjusters


  • Wide range of configurations
  • Very smooth backlash-free motion
  • Based on the Very Small dovetail slide series
  • One of the smallest micropositioners available

The Elliot Scientific MDE268 slide is an ultra-small, dual axis micropositioner with simple adjusters for XZ linear translation stage applications in physics experiments or optical systems.

Travel 3 mm
Sensitivity < 0.5 µm

0.25 pitch with 1.27 mm hex socket
Ball hex driver not supplied

eg. MDE213-HEX, 735-144 or 609-590

Top plate 12 x 12 mm
Mounting holes Four M1.6 x 2 mm deep on both sides


Options and Accessories
MDE265 Series Drawing
Click here to download

Knurled knob adjuster
(Sold separately as P/No. MD-054115)

MDE213-hex Hex Key 1.27AF for simple adjusters

Post mounting using MDE857 (and MDE858 if required)    
Fibre holders available: MDE719 and MDE730

 Low magnetic version MDE268-LM

 Low Magnetic & Vacuum version LM-V

 Vacuum compatible version MDE268-V

 Standard MDE268 

MDE269 with optional MD-054115 adjusters


Note: Surface mating with these micropositioners must be truly flat. Unflat surfaces or overtightened screws will cause the slide motion to be jerky and stiff due to distortion. Dovetail slides, unlike miniature ball slides, are unlikely to be permanently damaged by temporary distortion, as the load is supported on a comparatively large area.

File Name Size Link
MDE268_135.PDF 79.54KiB Download
MDE268_135.SLDPRT 453KiB Download
MDE268_135.STEP 1.63MiB Download
MDE268_3D_135.PDF 219.54KiB Download
Terms and Conditions V6 206.45KiB Download
Showing 1 to 5 of 5 (1 Pages)