Your Cart

MDE265 KN-3 mm travel single-axis micropositioner, knurled adjuster

MDE265 KN-3 mm travel single-axis micropositioner, knurled adjuster
Limited Stock
MDE265 KN-3 mm travel single-axis micropositioner, knurled adjuster
  • Stock: In stock - Contact us for lead times.
  • Click here to: Contact us
  • Model: Martock MDE265 KN

3 mm travel single-axis micropositioner, knurled adjuster

MDE265  KN 

  • Wide range of configurations
  • Very smooth backlash-free motion
  • Based on the Very Small dovetail slide series
  • One of the smallest micropositioners available

The Elliot Scientific MDE265 slide is an ultra-small, single axis micropositioner with simple adjusters for linear translation stage applications in physics experiments or optical systems.

Travel 3 mm
Sensitivity < 0.5 µm

0.25 pitch with 1.27 mm hex socket
Ball hex driver not supplied

eg. MDE213-HEX,  735-144 or 609-590

Top plate 12 x 12 mm
Mounting holes    Four M1.6 x 2 mm deep on both sides


Options and Accessories
MDE265 Series Drawing
Click here to download
Post mounting using MDE857 (and MDE858 if required)   
Fibre holders available: MDE719 and MDE730
 Low magnetic version MDE265 LM

 Vacuum compatible version MDE265 V

 Low Magnetic& Vacuum version MDE265 LM-V

Standard version MDE265

• Knurled knob adjuster (see below)
(Knurled knob sold separately as P/No. MD-054115)

• MDE213-HEX,  Hex Key 1.27AF for simple adjusters

MDE269 with optional MD-054115 adjusters


Note: Surface mating with these micropositioners must be truly flat. Unflat surfaces or overtightened screws will cause the slide motion to be jerky and stiff due to distortion. Dovetail slides, unlike miniature ball slides, are unlikely to be permanently damaged by temporary distortion, as the load is supported on a comparatively large area.

File Name Size Link
MDE265_165.PDF 77.33KiB Download
MDE265_165.SLDPRT 281KiB Download
MDE265_165.STEP 854.74KiB Download
MDE265_3D_165.PDF 125.62KiB Download
MDE265_SERIES_165.PDF 85.33KiB Download
Showing 1 to 6 of 6 (1 Pages)