Your Cart

MDE511 - Elliot Gold™ Series Fibre Launch System with Standard Adjusters

MDE511 - Elliot Gold™ Series Fibre Launch System with Standard Adjusters
Limited Stock
MDE511 - Elliot Gold™ Series Fibre Launch System with Standard Adjusters
  • Stock: In stock - Contact us for lead times.
  • Click here to: Contact us
  • Model: Martock MDE511

Elliot Gold™ Series Fibre Launch System with Standard Adjusters   


  • Suitable for multimode fibre (125 µm)
  • Orthogonal alignment grooves
  • 200 nm resolution with 2 mm travel per axis
  • 4.5 kg load capacity
  • Ultra-stable patented design XYZ flexure stage

Elliot Gold™ Series Fibre Launch system comprising: 3-axis standard manual flexure stage with basic fibre (US: fiber) holder, objective lens mount with RMS thread, and small fixed bracket. Suitable for launching free space light beams into multimode fibre due to its accurate 3D flexure-based positioning.

All accessories are compatible with the Elliot Gold™ series flexure stages. The optical axis height is 18 mm above the platform surface and on the centre line of the location slot. Where necessary a locating tongue forms part of the accessory. A standard clamp system is used and is supplied with the flexure stages and accessory platforms. The choice of objective lens is subject to user preference, and must be ordered separately. Extra clamp sets (MDE154) are available if required.
Elliot MDE511 Gold series Fibre Simple Adjuster Launch System Axis Diagram

System Constituents
MDE711 Standard Fibre holder
MDE330 Elliot Gold™ series XYZ High Precision Flexure Stage
MDE217 Standard Manual adjusters 0.25 pitch (x3)
MDE154 Clamp Set
MDE150 Objective mount with RMS thread (Lens not included)
MDE148 Small fixed bracket


ConfigurationRight handed version
Fibre holderSingle V-groove to suit 125 µm fibre with magnetic clamping arm.
Adjuster TypeThree standard manual adjusters, 0.25 pitch (Model MDE217)
Stage travel2 mm in X, Y and Z axes
Resolution200 nm
Load capacity4.5 kg
Arcuate Displacement  X axis 20 µm (at maximum range of travel)
Y and Z axes 14 µm (at maximum range of travel)
Optical axisThe optical height of all Flexure Stage accessories is 18 mm above the top plate. Therefore, the optical axis height of a mounted accessory is 94 mm above the bottom of the stage
Objective mount Removable stainless steel sleeve with RMS thread (0.800"-36). Allows on-axis adjustment and exchange of objectives or suitably mounted aspheric or ball lenses
VariantsLeft-handed version available
Imperial thread versions available
Custom v-groove sizes


† Patent Nos. GB 2129955B & USA 4635887

File NameSizeLink
Fibre Launch Catalogue 20131.41 MbDownload
Showing 1 to 1 of 1 (1 Pages)