MDE711-250 - Fibre Holder
- Simple economical design
- Single fixed size V-groove for 250 µm fibre
The model MDE711 is an economical fibre (US: fiber) holder with a machined 250 µm V-groove and magnetic clamp arm for less critical applications.
The fibre holder is designed to complement the Elliot Gold™ series XYZ flexure stages, but can also be mounted on a conventional 25 mm pitch optical table using adaptor plate MDE860 or M4 post using the same adaptor.
A comprehensive range of fibre holders using vacuum, magnet or spring-loaded clamps is available. User replaceable V-grooves enable the user to work with different fibre sizes economically. Custom grooves are our speciality.
All accessories are compatible with the Elliot Gold™ series flexure stages. The optical axis height is 18 mm above the platform surface and on the centre line of the location slot. Where necessary a locating tongue forms part of the accessory. A standard clamp system is used and is supplied with the flexure stages and accessory platforms. The clamp set (MDE154) is available separately if required.
|Configuration||Single machined V-groove and magnetic clamp arm|
|Fibre size||250 µm|
|Fibre clamp||Single magnetic clamp arm|
|Optical Axis||94 mm when mounted on an Elliot Gold™ series XYZ flexure stage|
Custom sized V-grooves