MDE710 - Fibre Holder (Jacketed/Mechanical) for Elliot Gold™ Series XYZ Flexure Stages
Jacketed Fibre Holder (Mechanical)
- Very easy to use
- Clamp force adjustable from 25 to 125 g
- Contact point on fibre is a resilient pad
- 125/250 µm fibre with a jacket up to 1 mm diameter
- Clamp arm swings clear of V-groove for easy loading of fibre
The model MDE710 Fibre Holder features a double V-groove and clamp arms to hold 125/250 µm fibre (US: fiber) with a jacket up to 1 mm diameter. The clamp arms swing clear of the V-groove, and the clamp forces can be adjusted from 25 to 125 g, making the unit very easy to use.
The fibre holder is designed to complement the Elliot Gold™ series XYZ flexure stages, but can also be mounted on a conventional 25 mm pitch optical table using adaptor plate MDE860 or M4 post using the same adaptor.
A comprehensive range of fibre holders using vacuum, magnet or spring-loaded clamps is available. User replaceable V-grooves enable the user to work with different fibre sizes economically. Custom grooves are our speciality.
All accessories are compatible with the Elliot Gold™ series flexure stages. The optical axis height is 18 mm above the platform surface and on the centre line of the location slot. Where necessary a locating tongue forms part of the accessory. A standard clamp system is used and is supplied with the flexure stages and accessory platforms. The clamp set (MDE154) is available separately if required.
|Configuration||Double V-groove and clamp arms for cladding and jacket|
|Fibre size||125/250 µm fibre with up to 1 mm jacket|
|Fibre clamp||Double clamp arms with adjustable force|
|Clamp force||Adjustable from 25 to 125 g|
|Optical Axis||94 mm when mounted on an Elliot Gold™ series XYZ flexure stage|
V-groove custom sizes available
A number of papers have been published by scientists around the globe who have used an Elliot MDE710 within their research. Here is an example: