Your Cart

MDE265 KN- Single Axis Ultra-Small Micropositioner Stage Knurled Adjusters

MDE265 KN- Single Axis Ultra-Small Micropositioner Stage Knurled Adjusters
  • Stock: In stock - Contact us for lead times.
  • Click here to: Contact us
  • Model: Martock MDE265 KN

Single Axis Ultra-Small Micropositioner Stage   - Knurled Adjusters

MDE265  KN 

  • Wide range of configurations
  • Very smooth backlash-free motion
  • Based on the Very Small dovetail slide series
  • One of the smallest micropositioners available

The Elliot Scientific MDE265 slide is an ultra-small, single axis micropositioner with simple adjusters for linear translation stage applications in physics experiments or optical systems.

Travel3 mm
Sensitivity< 0.5 µm

0.25 pitch with 1.27 mm hex socket
Ball hex driver not supplied

eg. MDE213-HEX,  735-144 or 609-590

Top plate12 x 12 mm
Mounting holes   Four M1.6 x 2 mm deep on both sides


Options and Accessories
MDE265 Series Drawing
Click here to download
Post mounting using MDE857 (and MDE858 if required)   
Fibre holders available: MDE719 and MDE730
 Low magnetic version MDE265 LM

 Vacuum compatible version MDE265 V

 Low Magnetic& Vacuum version MDE265 LM-V

Standard version MDE265

• Knurled knob adjuster (see below)
(Knurled knob sold separately as P/No. MD-054115)

• MDE213-HEX,  Hex Key 1.27AF for simple adjusters

MDE269 with optional MD-054115 adjusters


Note: Surface mating with these micropositioners must be truly flat. Unflat surfaces or overtightened screws will cause the slide motion to be jerky and stiff due to distortion. Dovetail slides, unlike miniature ball slides, are unlikely to be permanently damaged by temporary distortion, as the load is supported on a comparatively large area.

File NameSizeLink
MDE265_165.PDF77.33 kbDownload
MDE265_165.SLDPRT281 kbDownload
MDE265_165.STEP854.74 kbDownload
MDE265_3D_165.PDF125.62 kbDownload
MDE265_SERIES_165.PDF85.33 kbDownload
Showing 1 to 6 of 6 (1 Pages)