Menu
Your Cart

MDE521 - Elliot Gold™ Series Polarisation Maintaining Fibre Launch System with Basic Adjusters

MDE521 - Elliot Gold™ Series Polarisation Maintaining Fibre Launch System with Basic Adjusters
Built to order
MDE521 - Elliot Gold™ Series Polarisation Maintaining Fibre Launch System with Basic Adjusters
  • Stock: In stock - Contact us for lead times.
  • Click here to: Contact us
  • Model: Martock MDE521
£1,243.00

Elliot Gold™ series Polarisation Maintaining Fibre Launch System with Basic Adjusters   

MDE521   

  • Approximately 0.1 degrees rotational resolution
  • Suitable for PM fibre (125 µm)
  • Orthogonal alignment grooves
  • 200 nm resolution
  • 2 mm travel per axis
  • 4.5 kg load capacity
  • Ultra-stable patented design XYZ flexure stage

Elliot Gold™ Series polarisation maintaining (PM) fibre launch system comprising: 3-axis simple manual flexure stage with standard fibre (US: fiber) rotator, objective lens mount with RMS thread, and small fixed bracket.
 
Suitable for launching free space light beams into PM fibre as this requires the roll axis to be adjusted to ensure correct alignment of the laser and fibre polarisation axes.

All accessories are compatible with the Elliot Gold™ series flexure stages. The optical axis height is 18 mm above the platform surface and on the centre line of the location slot. Where necessary a locating tongue forms part of the accessory. A standard clamp system is used and is supplied with the flexure stages and accessory platforms. The choice of objective lens is subject to user preference, and must be ordered separately. Extra clamp sets (MDE154) are available if required.


Elliot MDE521 Gold Series Axis DiagramSystem Constituents
MDE718 Fibre rotator
MDE330 Elliot Gold™ series XYZ High Precision Flexure Stage
MDE217 Manual adjusters 0.25 pitch (x3)
MDE154 Clamp Set
MDE150 Objective mount with RMS thread (Lens not included)
MDE148 Small fixed bracket

Specifications

ConfigurationRight handed version
Fibre holderV-groove & single clamp arm for 125 µm fibre. Spring-loaded clamp arm force adjusts from 25 to 125 g
Fibre rotationFull 360° rotation. Resolution approx 0.1 degrees
Adjuster TypeThree simple manual adjuster, 0.25 pitch (Model MDE217)
Stage travel2 mm in X, Y and Z axes
Resolution200 nm
Load capacity4.5 kg
Arcuate Displacement   X axis 20 µm (at maximum range of travel)
Y and Z axes 14 µm (at maximum range of travel)
Optical axisThe optical height of all Flexure Stage accessories is 18 mm above the top plate. Therefore, the optical axis height of a mounted accessory is 94 mm above the bottom of the stage
Objective mount Removable stainless steel sleeve with RMS thread (0.800"-36). Allows on-axis adjustment and exchange of objectives or suitably mounted aspheric or ball lenses
VariantsLeft-handed version available
Imperial thread versions available
Custom v-groove sizes

 

† Patent Nos. GB 2129955B & USA 4635887

File NameSizeLink
Fibre_Launch_2013_210.pdf1.41 MbDownload
Showing 1 to 1 of 1 (1 Pages)