Bare Fibre Holder (Mechanical), Long Reach
- Very easy to use
- Clamp force adjustable from 25 to 125 g
- Contact point on fibre is a resilient pad
- 125/250 µm fibre with a jacket up to 1 mm diameter
- Fibre held in user-replaceable V-groove by spring clamps
- Clamp arm swings clear of V-groove for easy loading of fibre
Long reach fibre holder for bare fibre (US: fiber). Fibre held in user-replaceable V-groove by spring clamps (as on MDE710. Includes Universal Base MDE752 which allows fibres to be located offset from central axis.
The model MDE750 Fibre Holder features a double V-groove and clamp arms to hold 125/250 µm fibre with a jacket up to 1 mm diameter. The clamp arms swing clear of the V-groove, and the clamp forces can be adjusted from 25 to 125 g, making the unit very easy to use.
A comprehensive range of fibre holders using vacuum, magnet or spring-loaded clamps is available. User replaceable V-grooves enable the user to work with different fibre sizes economically. Custom grooves are our speciality.
All accessories are compatible with the Elliot Gold™ Series flexure stages. The optical axis height is 18 mm above the platform surface and on the centre line of the location slot. Where necessary a locating tongue forms part of the accessory. A standard clamp system is used and is supplied with the flexure stages and accessory platforms. The clamp set (MDE154) is available separately if required.
||Double V-groove and clamp arms for cladding and jacket
||125/250 µm fibre with up to 1mm jacket
||Double clamp arms with adjustable force
||Adjustable from 25 to 125 g